Thursday 5 October 2017

Reflections - shaker cards

Hi everybody,
It's Donna here with some more cards using the Jillibean Soup paper that were in the September Cropaholic kit.

The theme for this month's challenge is Reflections, and looking at our favourite projects. I chose this card that I made about a month and a half ago because I love it, and because it highlights one of my favourite things- shaker cards. Here is the card I'm talking about.




In this post I have also included a detailed how-to for making your own shaker cards or elements in your scrapbooking pages. 

I have below a picture of all the elements I used to make another shaker card below. The only things not pictured are clear plastic, like the plastic that the kits come in, and adhesive tape. The important thing here is the rectangular white piece with a square cut out of it. You can make any shape shaker, like the small hearts which are all individual shakers in the card above. If you have a cutting machine, this step is easy, but the same effect can be made by carefully cutting a hole out with scissors.

First I attached the frame to the front of the card. This is optional, but I thought for this card, the pop of green would stop the card from being too pink all over.
 Next, on the back of the panel, I laid down some adhesive tape (glue would be just as good) and cut a piece of plastic to just larger than the cutout window and laid it on top. If you look carefully, you can see the clear plastic in the photo below.
Once the plastic was in place, I added the next layer of adhesive. This time it was foam tape. You can do two layers if the bits that you want to shake around are thicker, as they were in the heart shaker card. The important thing is to not leave any gaps around the window, because the sequins will escape if you do! I had to be especially careful in this case, because the sequins, which come from my stash, are tiny, and also because the You are Amazing panel was only just bigger than the window.



I added some sequins to the middle of the window, then peeled off the middle tape, and placed the You are Amazing panel face down on the window. I then added a little more flat tape to the middle section.

Next, I peeled off all the backing and stuck the shaker element to my card, which was exactly the same size as the shaker panel.
 Finally, I added the flamingos and flowers to complete the card, using a mix of flat and dimensional adhesive tapes.
 Finally, here is the completed card.

Until next time, may you know how amazing you are,

Blessings,
Donna
@donnadoll74

1 comment:

  1. Fantastic idea Donna! thank you for the tutorial and awesome cards xx

    ReplyDelete